WANTED: Local Airsmith

Hey,

I bought a KWA SR10 recently and it's only shooting around 320FPS with the hop-up turned all the way down.

I bought this gun used and supposably it has a m140 spring in it... although I can't confirm this because I've never opened the gearbox.

I think it might be a compression problem? Air nozzle?

Anyways, looking to pay someone locally to help me get this thing running 100% again at a decent FPS.

Send me a PM.

Thanks!

Kris

What battery are you using?

Repo wrote:

What battery are you using?

9.6v 1400mah

and sometimes use a 11.1v 1000mah lipo

I will come to you. Most repairs and most Guns will cost only $25, plus parts, and Gas $5-20 dollars Palm beach, Broward, Miami-Dade, and Stuart. You can also come to us. One hour service on most repairs!!! so you wont have your gun out of commission for weeks. we also have a 15 day warranty on all of our repairs. We also make custom guns. Give us a call or text @ 5 6 1 6 0 3 2 1 3 9.

I talked to you at the feild the last day we were there. I have fixed alot of guns and you can ask around. I dont live far from kendall so that isnt a problem. I will take a look at your gun for you. And remember the price I told you for fixing guns? No one beats it lol

Repo wrote:

What battery are you using?

batteries dont make a difference in fps. ive tested 4 different batteries from 8.4 to 11.1 on my m4 and the fps was the same. the piston is always pulled back the same with any battery, if its stron enough to pull it back, its just the speed that is a difference.

just make sure whoever does your work can guarantee it, you gotta pay to play

Cylinder, spring, piston head, cylinder head, air nozzle, o-rings, and barrel length when compared to cylinder type are things you should look at.

If you bought it used and it was opened up to have a m140 spring put in, then they replaced the factory air nozzle (probably). the new 2gx come with a completely different air nozzle than before. It have a flat, square like part at the top. should you put the traditional cylinder like air nozzles, there will be a massive gat in which you will lose huge amounts of compression. ask the budy that you bought the kwa from if he still has it. if he does, then get on that like it was the last chick on earth. It has to be KWA, that is how they are now building thier guns.

Thanks guys!

Seems spring was worn out.

Replacing it tomorrow and I should be good to go for thursdays night game.

I've written down your info devil, thnx!

To wear down that much you must have left it compressed.

Took it to get fixed and it turns out spring and gears are screwed up.

4 broken teeth on main gear and I've only used the gun once!

I'm looking to buy a KWA gear set.

Hit me up, I pay cash/paypal and can meet up with you to pick it up.

Lets do this!

Kris

Go to a lower FPS spring first like 120.

Repo wrote:

Go to a lower FPS spring first like 120.

Bravo Heat-Treated Steel Enhanced Helical Ultra Torque Gear Set can handle m130 and above. Might be getting this gear set.

it doesnt have to be KWA to be amazing, something with good ratings should be working just fine, any gun shooting 400+ would be good enough

Kris wrote:

Repo wrote:

Go to a lower FPS spring first like 120.

Bravo Heat-Treated Steel Enhanced Helical Ultra Torque Gear Set can handle m130 and above. Might be getting this gear set.

Well unless your gonna upgrade the whole gearbox a lower FPS spring may be what you need.

Jack Rot wrote:

it doesnt have to be KWA to be amazing, something with good ratings should be working just fine, any gun shooting 400+ would be good enough

Gonna deff pick up those Bravo reinforced steel gears today and pair it up with an m130.

Thanks for the help guys - as always greatly appreciated!

Kris

if you havent bought anything yet, pm me please.. hold off on your purchase.

130 would be a much better idea. Your still skating the line, but if a good airsmith does your gearbox you should get alot more life out of your parts.

The gear were missing around 6 teeth and spring was completely worn.

Got it a new 130 spring, bravo gear and a systema motor.

Lets see...

Kris wrote:

Repo wrote:

Go to a lower FPS spring first like 120.

Bravo Heat-Treated Steel Enhanced Helical Ultra Torque Gear Set can handle m130 and above. Might be getting this gear set.

you can just get an aim top gearset with a piston with full steel teeth for $50. i have the high torque set with an m130 running a lipo for 3 months now and no problems at all they still look new. high price doesnt always mean its better