Upgrade questions for a JG m16a2!

Hey guys I have a Jg m16a2 stock, with only a new 9.6 battery. The accuracy is pretty bad, and the spring sounds hollow inside the plastic body. What upgrades should I get to increase accuracy, hop up, and reliability? Budget is less than 100$

A systema hop up bucking:

http://www.evike.com/product_info.php?manufacturers_id=&products_id=24636

PolarStar Concave Spacer (PCS)

http://www.evike.com/product_info.php?manufacturers_id=&products_id=31599

This worked amazing for me, it increased accuracy a lot. And range

Thanks bro! I'll order a tightbore too. And evike is having 20% off too!
Since I have the m16 enhanced, Is it reliable enough?

is what reliable? the tightbore? or the things i posted? and how long is your inner barrel?

I might have to do this upgrades to my 614

xTwiiisteDx wrote:

A systema hop up bucking:

http://www.evike.com/product_info.php?manufacturers_id=&products_id=24636

PolarStar Concave Spacer (PCS)

http://www.evike.com/product_info.php?manufacturers_id=&products_id=31599

This worked amazing for me, it increased accuracy a lot. And range

lmfao told you it would.

couple those with a 6.01 tightbore barrel and your accuracy and range will be incredible.


as for the jg being reliable enough, it will do the job perfectly, the only upgrades i would reccomend for a longer life and better performnace would be metal bushings/bearings (your preference/budget) a full metal toothed piston (evike, azimuth piston or devil piston) and a new spring since the stock spring likes to settle down quick.

Hell yea Jester, lol it worked amazing! i am going to get the tightbore but there is no 300mm so i will go for a 337mm i believe which is the next available length. and since it is longer i herd that it might be better to get a 6.03 rather than 6.01. is this true?

6.01 is better.There isn't a noticeable difference between 6.03 and stock.

DEVIN wrote:

6.01 is better.There isn't a noticeable difference between 6.03 and stock.

that is complete crap, and whoever you heard that from should be sentenced to death. lmao

it depends, usually for a longer rifle id go with a 6.03 just cause it has more tolerance, but for a shorter gun id go with a 6.01 since you need to make every milimeter count.

as for the 300mm barrel try evike and check out the madbull barrels.

yea evike doesnt have 6.01 300mm, the next available barrel after a 247mm is a 363mm. For my gun, would it be good to get the 6.01 363mm?

xTwiiisteDx wrote:

yea evike doesnt have 6.01 300mm, the next available barrel after a 247mm is a 363mm. For my gun, would it be good to get the 6.01 363mm?

lmao this is the one i have in my g36c

http://www.evike.com/product_info.php?cPath=24_72_376&products_id=31389

I though you said the 6.01 was better? Is angel a good brand?

http://www.evike.com/product_info.php?cPath=24_72_732&products_id=35487

Theres no really big, significant difference between tightbore barrels in my opinion. And I've heard of Angel, and it's not one of those lousy companies as far as I can hear and tell.

Thanks guy! I'm going with a 6.03 509 mm, FF bucking, pcs, and maybe a decent 110 spring. After my VN style mag and 4x scope show up in the mail I should have a decent dmr. Were any of you guys at Pb matrix field on 11-19-11?

I am not tooo sure about what i am about to say, so double check it with Jester or the other guys who know more than me, but when you upgrade your spring make sure your motor can take it, or else you will ware out your motor faster

Ahh I cant wait to place my order

xTwiiisteDx wrote:

I am not tooo sure about what i am about to say, so double check it with Jester or the other guys who know more than me, but when you upgrade your spring make sure your motor can take it, or else you will ware out your motor faster

m110 spring is about 360-380 fps, his motor can take it. and its not the wear on the motor its that the motor wont be able to pull it back if its too strong

as for the barrel, i fucked up on the link lmfao youre right its a 363mm 6.01

o ok lol so is that good? a 6.01 363mm madbull tightbore? Or should i get the 6.01 300mm angel? Or the 6.03?

xTwiiisteDx wrote:

o ok lol so is that good? a 6.01 363mm madbull tightbore? Or should i get the 6.01 300mm angel? Or the 6.03?

6.01 363mm

ok will do

just ordered a madbull 6.03, systema bucking. my 4x scope, mag, and .25 bb's will be here next week same as my tightbore. dmr STATUS wooo!

NICE BRO! I love the feeling of ordering and waiting! It is torturous lol. My order should be arriving withing the next hour so I am EXCITED!

have you guys dealt with evike though? i see most links on the forums are evikes. this is my first time ordering from them, the whole 20% deal was too good to pass up.

i've only shopped airsoft gi, but they're horrible at restocking.

Rogue Echo 1 wrote:

have you guys dealt with evike though? i see most links on the forums are evikes. this is my first time ordering from them, the whole 20% deal was too good to pass up.

i've only shopped airsoft gi, but they're horrible at restocking.

i only buy from evike.

the couple of times ive shopped at airsoft gi theyve either fucked shit up, took long as hell to ship my order, or advertised a product as in stock when it wasnt and tried everything to keep my money.

Jester wrote:

Rogue Echo 1 wrote:

have you guys dealt with evike though? i see most links on the forums are evikes. this is my first time ordering from them, the whole 20% deal was too good to pass up.

i've only shopped airsoft gi, but they're horrible at restocking.

i only buy from evike.

the couple of times ive shopped at airsoft gi theyve either fucked shit up, took long as hell to ship my order, or advertised a product as in stock when it wasnt and tried everything to keep my money.

i never had a problem with airsoftgi they are awesome i always had a problem with evike i think there bad personally