Is a 6.03 tbb more accurate than a 6.01

Numerous people from different websites have recently come up with topics saying that a 6.03 tbb could actually be more precise than a 6.01, someone even said that "physics says a 6.01 is more accurate, but experience says 6.03"

Thoughts?

I think yes danny but thats like a yes and no

RecoN wrote:

Numerous people from different websites have recently come up with topics saying that a 6.03 tbb could actually be more precise than a 6.01, someone even said that "physics says a 6.01 is more accurate, but experience says 6.03"

Thoughts?

why make a 6.01 then if 6.03 is more accurate? dont believe everything you read or see online, hardest part about doing research online is finding a reputable source.

e46hoodrich wrote:

RecoN wrote:

Numerous people from different websites have recently come up with topics saying that a 6.03 tbb could actually be more precise than a 6.01, someone even said that "physics says a 6.01 is more accurate, but experience says 6.03"

Thoughts?

why make a 6.01 then if 6.03 is more accurate? dont believe everything you read or see online, hardest part about doing research online is finding a reputable source.

that also goes the other way. why would you pay the same amount of money for a 6.03 when you can just buy a more accurate 6.01?

Of course they intend for a 6.01 to be more accurate, but maybe 6.03s are more accurate for some unknown reason.

And this isn't just from 1 website. Many, many people have debated and tried to prove this, it's on multiple forums and websites

RecoN wrote:

e46hoodrich wrote:

RecoN wrote:

Numerous people from different websites have recently come up with topics saying that a 6.03 tbb could actually be more precise than a 6.01, someone even said that "physics says a 6.01 is more accurate, but experience says 6.03"

Thoughts?

why make a 6.01 then if 6.03 is more accurate? dont believe everything you read or see online, hardest part about doing research online is finding a reputable source.

that also goes the other way. why would you pay the same amount of money for a 6.03 when you can just buy a more accurate 6.01?

Of course they intend for a 6.01 to be more accurate, but maybe 6.03s are more accurate for some unknown reason.

And this isn't just from 1 website. Many, many people have debated and tried to prove this, it's on multiple forums and websites

well i can tell you i am a airsoft technician and ive never heard of that. and from my personal expierience. 6.01 not only give more fps, but your groupings are alot tighter. + 6.01's do cost more then 6.03's. nambrands make a difference. a cheap 6.01 might cost the same as a very good 6.03. just like a really good namebrand 6.03 might perform just as good as a cheap ass 6.01. get me?

if you get the same namebrand tbb, your going to notice 6.01 has a little better peformance

e46hoodrich wrote:

RecoN wrote:

e46hoodrich wrote:

RecoN wrote:

Numerous people from different websites have recently come up with topics saying that a 6.03 tbb could actually be more precise than a 6.01, someone even said that "physics says a 6.01 is more accurate, but experience says 6.03"

Thoughts?

why make a 6.01 then if 6.03 is more accurate? dont believe everything you read or see online, hardest part about doing research online is finding a reputable source.

that also goes the other way. why would you pay the same amount of money for a 6.03 when you can just buy a more accurate 6.01?

Of course they intend for a 6.01 to be more accurate, but maybe 6.03s are more accurate for some unknown reason.

And this isn't just from 1 website. Many, many people have debated and tried to prove this, it's on multiple forums and websites

well i can tell you i am a airsoft technician and ive never heard of that. and from my personal expierience. 6.01 not only give more fps, but your groupings are alot tighter. + 6.01's do cost more then 6.03's. nambrands make a difference. a cheap 6.01 might cost the same as a very good 6.03. just like a really good namebrand 6.03 might perform just as good as a cheap ass 6.01. get me?

if you get the same namebrand tbb, your going to notice 6.01 has a little better peformance

Alright, thanks for answering back.

I always knew that a 6.01 should be more accurate than a 6.03, but since so many people were telling otherwise I just figured that a 6.03 could possibly be a better buy than a 6.01.

Again, a benchmark tests between the two barrels is hard. you have to make sure there is no grime, same gun, same weather and wind conditions, same humidity. all of these factors plus more contribute to where a very light .20 gram pellet could land; these factors probably tricked many people to believing a 6.03 was more accurate, but idk since I don't have both the same brand 6.03 and 6.01

i dont recommend 6.01 for full auto guns. 6.01mm is mostly good for semi-auto or bolt actions.

i use 6.01 for all my rifles. they are more accurate than a 6.03 for a longer distance.

for instance if you want it for cqb a 6.03 will do the same thing as a 6.01, now if you go out into woods you will see the spread more clearly

also a 6.01 needs more maintenance than a 6.03, ive never had to clean my 6.01s but then again i dont put my barrels into the ground or near dust clouds etc.

lastly a 6.01 needs very high grade bbs or they could jam in the barrel.

usually if you have a high rate of fire i recommend a 6.03 max (pussy rifles, LMGS , ghetto blasters etc)
or if you have something for a long op or milsim (nothing here in SF) then i also recommend a 6.03 so you wont have to worry about dirt or jams with the barrel

Jester wrote:

i use 6.01 for all my rifles. they are more accurate than a 6.03 for a longer distance.

for instance if you want it for cqb a 6.03 will do the same thing as a 6.01, now if you go out into woods you will see the spread more clearly

also a 6.01 needs more maintenance than a 6.03, ive never had to clean my 6.01s but then again i dont put my barrels into the ground or near dust clouds etc.

lastly a 6.01 needs very high grade bbs or they could jam in the barrel.

usually if you have a high rate of fire i recommend a 6.03 max (pussy rifles, LMGS , ghetto blasters etc)
or if you have something for a long op or milsim (nothing here in SF) then i also recommend a 6.03 so you wont have to worry about dirt or jams with the barrel

so i can get a 6.01 for my m4 and it would be good for CQB and field? what do you think?

get a 6.02 and get the best of both worlds. http://www.airsoftatlanta.com/Guarder-6-02mm-M4-Barrel-363mm-p/34502.htm
http://www.airsplat.com/Items/AC-UPI-DF-CPB20.htm
http://www.amazon.com/Raptors-Airsoft-Cyclops-Barrel-Enhanced/dp/B00BEJCZU4

crixus044 wrote:

get a 6.02 and get the best of both worlds. http://www.airsoftatlanta.com/Guarder-6-02mm-M4-Barrel-363mm-p/34502.htm
http://www.airsplat.com/Items/AC-UPI-DF-CPB20.htm
http://www.amazon.com/Raptors-Airsoft-Cyclops-Barrel-Enhanced/dp/B00BEJCZU4

i didn't even know those existed lol

Neither did I, until a week ago when I was researching inner barrels for my M4, and I found 6.03 and 6.01. I typed on google 6.02 mm inner barrel and actually found results.