G&G m4 top tech

thinking about putting a tightbore into a G&G and wanted to ask if a 6.01 will be jamming .20 into the gun alot or if its safe thanks

Unless your going to get a very long barrel gun and use very high quality bbs every time you won't really get much benifit from a 6.01 vs a 6.03.

Repo wrote:

Unless your going to get a very long barrel gun and use very high quality bbs every time you won't really get much benifit from a 6.01 vs a 6.03.

ok then thanks

Welcome. If you get certain brands they already have 6.04 which is more or less as good as a 6.03 so you gotta do your research or you will end up spending money for nothing.

Repo wrote:

Welcome. If you get certain brands they already have 6.04 which is more or less as good as a 6.03 so you gotta do your research or you will end up spending money for nothing.

i had a G&G top tech mp5 and the accuracy was just making me throw up with .20 and adjusted correctly so i was like automatically it needs a tightbore idk about their m4's but lets see

mp5's have a much shorter barrel than m4's, stock barrels (usually) suck, same can be said for stock buckings and nubs. fix all that and have a well tuned gearbox will have you hitting the same spot nearly every time at 80 feet with .20's outside. at 80 feet you could nail a paper plate pretty consistently

If you don't run a mp5 without a extended barrel hidden in a mock silencer you probably are lucky to hit a 100ft shot on semi. MP5s/7s, shotguns, bullpups and folding stocks would become much more useful should anyone ever open a cqb place.